[China Glass Net] The glass drilling machine is a machine specially used for glass drilling, a discrete glass drilling machine and a horizontal glass drilling machine. Here is a brief introduction to the safe operation of the glass drilling machine.
1. The drilling operator must be a person who has been trained in skills and qualified for operation.
2. It is necessary to ensure that the insulation resistance of the power circuit and the control circuit to ground is not less than 1 megohm. The external grounding protection wire should be connected to the PE grounding plate in the control box, and the grounding resistance is less than 10 ohms.
3, the operator can not wear a loose coat when working, to organize the hair.
4. Before the equipment is started, the equipment must be thoroughly inspected, including the cooling system, pneumatic system, and power supply.
5. To avoid chipping of the glass hole, ensure that the work surface is perpendicular to the centerline of the drill shaft before drilling.
6. When drilling glass, the pressure of the drill bit must be adjusted according to the thickness of the glass.
7. During the drilling process, it is strictly forbidden to reach into the drilling position.
8. After the work is finished, the material core must be cleaned to ensure the equipment is clean and hygienic.
Faked-Denim Fabric,Knitted Denim Fabric,Fake Knit Denim Fabric,Fake Cotton Polyester Denim Fabric
Shaoxing Huangdaopo Trade Co.,Ltd. , https://www.sxhdptrading.com